For any machine, maintenance is very important. Good maintenance can effectively extend the service life of the nitrogen generator. In addition to maintenance, the correct use of the nitrogen generator is also vital to the extension of machinery and equipment.
1. Turn off all the power switches, including the nitrogen generator, the nitrogen inlet valve and the sampling valve, and wait for the system and pipelines to be completely relieved of pressure. Adjust the oxygen analyzer for sampling and adjust the pressure of the pressure reducing valve to 1.0 bar, adjust the sampling flow meter, and adjust the gas volume to about 1. Note that the sampling gas volume should not be too large, and start testing the nitrogen purity.
2. The shut-off valve of the nitrogen generator can be opened only after the compressed air pressure reaches 0.7mpa or more. At the same time, attention should be paid to observe the pressure change of the adsorption tank and whether the pneumatic valve can work normally.
3. The pressure of the regeneration tower is zero, and the pressure of the two towers should be close to half of the pressure of the original working tower when it is uniform.
4. Close the entire system and all parts of the system, and observe whether the nitrogen generation system is working normally when the pressure of the adsorption tank of the nitrogen generator reaches about 0.6MPa.
Post time: Oct-28-2021